E-Skateboard bei Regen – Was du in der Schweiz wissen musst (Guide 2025)

Switzerland is not a country of eternal sunshine – and if you ride an electric skateboard, you know:
Sooner or later, the rain will catch you.

But is it dangerous?
Can you still ride?
And what happens to the battery, ESC, and bearings if they get wet?

Here's the honest answer from ONSRA.

Are electric skateboards waterproof?

No – no e-skateboard is completely waterproof.
Even if some manufacturers claim it, it's simply marketing.
What matters is the protection class (IP rating).

• ONSRA Boards (e.g. VELAR, BLACK Carve 3 PRO) have an IP65 certification.
  → Means: dustproof and protected against splashing water, but not for heavy rain or puddles.

In short:

A light drizzle is okay.
Riding through deep water or continuous rain is prohibited.

What happens if the board gets wet?

Moisture can penetrate bearings, connectors or ESC housing.
This leads to:

• Corrosion at plug connections

• Short circuits in the electronics

• Bearing noises and sluggish rolling

Even a small amount of water ingress can endanger the battery – so always be careful.

How to protect your board in the rain

1. Ride slower – wet roads have less grip.

2. Avoid puddles and gullies – splash water penetrates from below.

3. Dry the board after every ride.

4. Protect plug connections with silicone grease.

5. Clean and oil bearings regularly.

If you're out and about and the rain surprises you:

• Wipe the board briefly,

• do not charge while it is damp,

• and store it in a dry place at room temperature.

Which boards withstand rain best?

All ONSRA boards feature CNC-milled seals and sealed enclosures, which repel water better than open systems.

Clothing and Grip – The Underestimated Factor

Even if the board holds up – you need to stay safe.

• Wear ONSRA gloves for grip with wet hands.

• Use shoe soles with good tread.

• In rain: reduce riding mode, set less braking force.

Many falls in the rain don't happen due to electronic failures, but due to lack of grip.

Can ONSRA boards be ridden in the rain?

Yes – cautiously and for short periods, no problem.
All ONSRA models are protected against splashing water.
However: no board is designed for continuous rain or deep water.

If you commute daily, a second set of bearings or a regular check is worthwhile.
Getting wet briefly is fine – ignoring it permanently is foolish.

Conclusion

Rainy rides are unavoidable in Switzerland – but manageable.
With common sense, care and the right boards like the
VELAR,
BLACK Carve 3 PRO
or the compact ZENO
you are perfectly prepared.

Dry your board, ride with care – and your e-skateboard will last forever.